Skip to content

Custom Workholding for Precision Torque Converter Balancing

Custom Workholding for Precision Torque Converter Balancing

Overview

A manufacturer of torque converters needed a highly specialized workholding solution for a balancing operation. The fixture had to accurately center the converter assembly while still allowing the part to rotate freely during balancing.

Challenge

This application required the chuck to locate and grip the torque converter without interfering with the balancing process.

  • The chuck had to lower onto the converter hub and center the assembly
  • The gripping system needed to hold the part accurately while allowing it to spin freely
  • A large through-hole was required so the machine’s splined drive shaft could pass through the chuck and engage the converter
  • The complete chuck and tooling assembly needed to maintain extremely tight runout during the balancing operation

Solution

Northfield selected a Model 800THS sliding-jaw air chuck and developed highly customized top tooling specifically for the application.

  • The Model 800THS provides standard 0.0001" T.I.R. accuracy
  • Custom jaw tooling incorporated high-precision bearing assemblies, allowing the converter to remain centered while rotating freely
  • A large through-hole provided clearance for the balancing machine’s splined drive shaft
  • The tooling was designed around the specific converter geometry while preserving the inherent accuracy of the chuck

Outcome

The finished system combined precision gripping, free rotation, and drive-shaft access in a single custom workholding solution.

  • Achieved 0.0001" T.I.R. while gripping the customer’s part
  • Maintained the accuracy capability of the chuck even with the specialized bearing tooling
  • Allowed the torque converter to rotate freely during balancing
  • Integrated directly with the machine’s existing splined drive system

The result demonstrates how Northfield can combine standard high-precision chuck technology with custom-engineered tooling to solve applications where conventional workholding is not enough.

Contact [email protected] to discuss your custom workholding application.

Next article Long-Term Precision in Hard Turning